B39-2006 Forepeak Mattress Dimensions?

Started by Lazy Pelican, April 19 2020, 19:49

Previous topic - Next topic

Lazy Pelican

We want to make a new mattress protector for the Forepeak on our B39- 2006, but don't have access at present.
Does anyone know the dimensions?
If anyone needs the aft cabin mattress dims we have them.

TIA,

John

Ziffius

Hi John, I am stuck on my 39 in Corfu so can measure the fore peak

Ziffius

60cm wide at fore end 209cm long at at centre and width 160cm at aft end not including the shelf on starboard side, I presume yours has the same shelf cutting into the mattress

Lazy Pelican

Hi Ziffius,

Thanks for the quick reply.
Could you also give me the dimensions around the cut out for the shelf- dims A mattress width at the start of the cut out, B  length of cut out, C width of cut out, on the attached photo.

Many thanks,
John

Ziffius

The photo with about 26 cm is the distance from the apex of the curve to the corners

Ziffius

Hope the photos are adequate for the purposes, is your cut out the same shape?

PETE

Lazy Pelican

Hi Pete,

That's great. Yes ours is the same shape, but we haven't been aboard since Oct!
Beers on me if our paths cross again- Lazy Pelican is based in Leros these days, but we're still home in uk.

How if life locked down in Corfu?

Thanks again,

John

Ziffius

Very quiet, hardly anyone about but at least there doesn't seem to be any corona virus here. Been re-caulking the teak decks so keeping busy.