Aft Toilet of Bavaria Classic 42

Started by Michtsui, December 05 2022, 05:10

Previous topic - Next topic

Michtsui

1. My Jabsco toilet flush seems got problem, even after we draw out all water out after use, the toilet would be gradually filled with water (seawater filling in) especially after racing, I checked the handle was in locked position (see picture)  - is it something wrong or we did something wrong?

2. If replacement is needed, any specifications need to be careful (is the serial part shown in the second picture ok?).

3. I heard about electric toilet, any comments?

Thanks in advance.

tiger79

You just need to replace the joker valve, it's an easy job which you can do in a few minutes.

It's a common standard Jabsco part which hasn't changed in specification for many years.

In my view, electric toilets are an unnecessary complication - the manual Jabsco works fine.

https://jabscoshop.com/sitesphere/templates/store7/product.aspx?sectionid=6&urltype=6&sssectionid=6&totype=CATEGORY&toid=55&pagetemplateid=45&pagetemplatecode=&categoryid=55&language=en&subfolder=/jabscoshop-spare-parts/29092-1000-joker-valve&sssectionname=Marine&&brandid=2

Michtsui