Bavaria Owners Forum

Member Forums => Bavaria Yacht Help! => Topic started by: ANTREVELL on April 08 2017, 20:06

Title: New Cruiser 33 control panel not showing starter battery voltage
Post by: ANTREVELL on April 08 2017, 20:06
My 2013 Cruiser 33 . The 301 control panel shows the percentage full of water and waste tank.
It also shows the domestic battery voltage  but when I select starter battery voltage it shows nothing .
Before I start looking for a problem . I wonder if the starter battery is maybe  not connected to the panel. I would appreciate anyone with the same boat and panel could check there's

Regards Tony Revell    Pegatha

Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: tiger79 on April 08 2017, 21:12
Just a thought, is the starter battery isolator switch turned on?
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: ANTREVELL on April 09 2017, 17:50
Very good point . I will check . Will feel an idiot if that is the problem. 

Regards Tony
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: Symphony on April 10 2017, 19:22
Just checked mine - reads fine with the starter battery switched on.
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: ANTREVELL on April 10 2017, 20:36
Hi Symphony

I have not been back to my boat to check. But if your engine switch is off do you still get a reading .

Regards Tony
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: Ziffius on April 10 2017, 22:16
Generally if the battery is isolated you won't have a reading on the voltmeter
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: Symphony on April 11 2017, 08:56
Think the panel is powered from the house bank as nothing goes on until that is switched on. will try all combinations when I go to the boat tomorrow.
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: tiger79 on April 11 2017, 15:23
I've just checked on my boat.  With the starter battery turned off, the panel reads 0 volts.
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: Ripster on April 13 2017, 22:39
Same on my 36 (2011) with starter batt isolator off 0 volts are shown on the panel.
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: GeoffV on April 14 2017, 05:42
Same on the cruiser 37.
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: ANTREVELL on April 14 2017, 20:34
Hi All

I am delighted but very embarrassed that with the engine switch on the panel shows starter battery voltage . I had assumed it would be like the Nasa battery monitor and be connected directly to the battery. So thankyou Tiger for suggesting this . I will creep away and hang my head . But I am delighted I have not got a problem
Thanks to everyone it is nice to have all the support .It is a shame we cannot all meet up but that would be a lot of sailing !

Regards a relieved Tony   Cruiser 33 Pegatha
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: tiger79 on April 14 2017, 21:19
Result!  And, don't worry, we're all happy to help and we've all got much worse blunders to confess!
Title: Re: New Cruiser 33 control panel not showing starter battery voltage
Post by: MarkTheBike on April 15 2017, 09:14
Quote from: tiger79 on April 14 2017, 21:19
... we're all happy to help and we've all got much worse blunders to confess...!

+1! Amen to that, Tiger.

Glad you're sorted, Tony. This is such a good forum - a huge fund of experience and technical knowledge.