Print Page - Pad Eye Fastening

Title: Pad Eye Fastening
Post by: patprice on June 29 2017, 15:33

Re the foredeck of my B42 year 2000.

I want to fasten a pad eye to the little square mounting point in front of the rope locker hatch.

Can I drill and tap into an aluminium plate embedded in the GRP? Or do I have to drill through and put a plate under?

Thanks

Pat

Title: Re: Pad Eye Fastening
Post by: Konan the Bavarian on June 30 2017, 00:29

Hi Patprice
I added a padeye to my B37, for a spinnaker pole downhaul to attach to.
It was very easy to drill & tap through the deck into the aluminium plate.
Remember to countersink around the top of the hole for a good seal to between sealant & bolt

Steven
Konan the Bavarian

Title: Re: Pad Eye Fastening
Post by: patprice on June 30 2017, 06:41

Thanks Konan
I had not thought of countersinking. Is that to stop water getting below into the fastening threads?

Title: Re: Pad Eye Fastening
Post by: Konan the Bavarian on July 04 2017, 23:15

yes, it provides a better seal than without
Steven

Bavaria Owners Forum

Member Forums => Bavaria Yacht Help! => Topic started by: patprice on June 29 2017, 15:33