Print Page - Bavaria 36 2003 Centre cleat

Title: Bavaria 36 2003 Centre cleat
Post by: stewartv on April 05 2018, 18:28

My 2003 Bavaria 36 has a sort of moulding on each side where a centre cleat could be installed. Does anyone know how hard / easy it is to fit these? I heard that the clutches on the cabin roof have a metal plate pre-installed under the fibreglass so you can drill and tap if you need to install additional units. Would the clever Germans have done the same with the centre cleats by chance?

Title: Re: Bavaria 36 2003 Centre cleat
Post by: artemis on April 05 2018, 20:57

Hi There

I would assume so if you take off the wooden skirt inside and look up you should see the metal plate inside or at least you can on my Bavaria 34 year 2001. I have cleats in both side midships

Rgds
Mike
Artemis

Title: Re: Bavaria 36 2003 Centre cleat
Post by: amikeren on April 06 2018, 14:34

Hi
I have done this before 5 years on a bavaria 36 2004
the place is prepared for the installation
Ami

Title: Re: Bavaria 36 2003 Centre cleat
Post by: The Other Woman on April 06 2018, 16:05

Hi all

Yes it's an easy job, with easy access from below.

Mick

Title: Re: Bavaria 36 2003 Centre cleat
Post by: stewartv on April 07 2018, 14:41

Thank you very much for your responses, I'll have a closer look next time I'm aboard.

Bavaria Owners Forum

Member Forums => Bavaria Yacht Help! => Topic started by: stewartv on April 05 2018, 18:28