Has anyone had the same problem with me in trying to source an anode that is already milled out to take the rope cutter. Every time I've changed the anode I've had to get an engineering shop (mate owns one) to mill it down to accept the rope cutter.
Stevie
Always done it myself with a dremel and cutter disc to take the top 1/2 inch or so off then a 13mm drill for the cutter to go into. Takes about 1/2 an hour and a bit of cursing to get it done.
Cheers
Looks like my mate will be doing a few more unless i bring them offshore to get the mechanic to do them. I'll buy 3 of them next time and get them all done at the same time as he sets up the machine to do the milling.
Stevie
Quote from: MIA on October 13 2012, 09:56
Has anyone had the same problem with me in trying to source an anode that is already milled out to take the rope cutter. Every time I've changed the anode I've had to get an engineering shop (mate owns one) to mill it down to accept the rope cutter.
Stevie
Available off the shelf from the manufacturer www.ropestripper.com
At £40+ I think I'll stick to a bit of cursing and the dremel :D
Symphony
thanks for the info
Stevie