Bavaria Owners Forum

Member Forums => Bavaria Yacht Help! => Topic started by: Nate Feldick on June 10 2019, 03:01

Title: AC Pump Relay Box/Pannel on '17 Vision 42
Post by: Nate Feldick on June 10 2019, 03:01
Hello All!  My AC pump runs continuously on my 2017 Vision 42.  I know its probably an issue with the pump relay switch but after looking at all the usual places, I can't find it.  Anyone know where the Pump Relay box/panel may be located?  Thanks!
Title: Re: AC Pump Relay Box/Pannel on '17 Vision 42
Post by: JJackson18b on July 30 2019, 03:18
Curious if you found the answer to this, mine does the same...
Title: Re: AC Pump Relay Box/Pannel on '17 Vision 42
Post by: paulemeier1 on July 30 2019, 10:43
pay attention not to get the hole water from the fresh water tank into your boat.
because it is also passible that there is a leak at a non visible area in your ship so better have a look.
Or the fresh water tank is empty? then the pump also run continuos
Title: Re: AC Pump Relay Box/Pannel on '17 Vision 42
Post by: Philipio on July 31 2019, 11:44
I have a Bav. 33 Cruiser (2006) and the fuel gauge stopped working a couple of months ago. For some reason  or other the sender unit was a 3 wire system. On going through the circuitry i found out that the feed for the sender was actually coming via the gauge in the binnacle.Easy to see the spade connections  without dismantling everything. Replaced the sender with a new 2 wire system and everything works great now.