Print Page - removing chart plotter to access binnacle Bav 32 2002

Title: removing chart plotter to access binnacle Bav 32 2002
Post by: filban on May 12 2022, 19:05

I need to remove my chart plotter from the binnacle as I am fitting a cockpit table to the front of the binnacle and need access to fit the bolts which fix the table support brackets

the table is a KJHowells folding leaf

I have never done this before and ask if anyone has any tips for this operation

attached is a photo of the rear business side of the binnacle

thanks

Title: Re: removing chart plotter to access binnacle Bav 32 2002
Post by: tiger79 on May 13 2022, 16:26

Take the front bezel off the chartplotter. You'll then be able to access the screws holding it on the binnacle.

Title: Re: removing chart plotter to access binnacle Bav 32 2002
Post by: Fenders on May 13 2022, 17:15

We fitted the same table to our B32. We accessed the binnacle through the large circular hatch under the throttle.
A few cables, etc to navigate but enabled us to reach the back(front?) of the binnacle where the table bolts will be located.

Title: Re: removing chart plotter to access binnacle Bav 32 2002
Post by: filban on May 13 2022, 18:31

Thanks for your replies

I have tried to access the necessary area through the circular access hatch but it seemed very congested ( or maybe I have big hands!)

I will remove the plotter carefully after removing the bezel

Bavaria Owners Forum

Member Forums => Bavaria Yacht Help! => Topic started by: filban on May 12 2022, 19:05