Hello,
I have found out that the noise and knocking from the Wheel room is coming from the Lewmar Gearbox at the steering system.
I think that there is Gap between the wheels in the Gearbox.
I could not decide to open it or not as it is also glued with silicone.
Any one has any exeperiences about this Gearbox?
Thx alot
Yes, I have had what sounds like a similar problem on my Bav39C 2005 with rod steering. I thought I had worn bevel gears but the sealed ball bearing under the large bevel gear was corroded and had clearance. I took the whole shaft out to a press to be disassembled so I could replace the bearing. Not a lot of info on the internet or from Lewmar. The local Lewmar dealer got a replacement bearing. Post a photo and I will tell you if mine was similar
A