Hello, I would like to know what size of sail drive is on my recently purchased Bavaria 36 2 cabin with Volvo MD2030 with 2 blades prop with ambassador rope cutter, so I can purchase the correct size of anode prior to lift out, thanks David
It's written on the type label, which you can find on the top of the saildrive (the gearbox).
You will need a modified anode with a cutout to make space for the stripper. Available from Ambassador. If the drive is original it will be a 120 - easy to identify because it is one piece
Hi Thanks for the replies, after a bit of research not is it only the slot that is different but I believe that the side wall is machined down to make it thinner as I have seen some posts that say they cannot reverse, they are twice price so that may be the reason
Yes, the recess is also machined out for clearance of the rotating cutter. Not sure what you mean by not being able to reverse as the shaft does not move backwards and forwards - just rotates in the opposite direction. This is unaffected by the cutter.