Intending to install a RAYMARINE AUTOPILOT EV-2.
Has anyone got any pictures of the auto pilot installation for a Bavaria 2004 42 ft?
Had a look at under the arft stearing and was not what I expected. Twin wheels drive chains connect to a gear box and head off at right angles to the rudder stock.
There seems to be provision for a motor to go on back of the gear box and some strang cable and conectors... see pics
I at a lose to where to intall .... seem to hard for me... and thats not posible...
Ian
Yup, the motor goes on that splined shaft opposite the chain sprocket.
Like this: https://www.osculati.com/en/11681-69.320.02/autopilot-drive-constellation-12v
Thank you Yngmar for the information
It looks like I can get a drive unit in Australia.
https://www.bluebottlemarine.com/products/lewmar-autopilot-drive-unit-mamba-drive-unit-1-4-hp-12-volt.html
My understaning I will need a sensor to interface with the RayMarine Autopilot Evolution with p70s control head & ACU-200, EV1 Sensor Core, EV1 Cabling kit and add on a Axiom plotter.
All up about $10,000 AUD.
Any more information accepted
Ian