Hi, I need to replace the seal on my MD2020D (2005) water pump as I have a slow drip of seawater coming out. It looks like the Volvo partnumber for this seal is : 833996. I can get this part in a number of retailers (I'm based in Ireland and would use marineparts.ie) however these seals all look like after market ones, instead of genuine parts. I have read that for this seal it's better to order the genuine part as that includes a stainless steal spring, rather than a steel one as in the non genuine parts. My questions are : does anyone have experience with the after market seals and whether they will last ? Also, does anyone know where I can get a genuine seal ? I found a genuine with retailer "Keypart" but with shipping this would amount to over 60 euro.... Thanks !
If you can establish the size of the old seal you can buy a viton seal[they are normally brown] They are only made with stainless springs and they last longer. Geoff
There are no Volvo seals, they buy them from manufacturers of seals and stuff them in a plastic bag with a Volvo part number. The suppliers change throughout the years as well. Saildrive ones were from Stefa for a while.
So you just pick one with the right specs (size, material, stainless spring), which is what usually keypart/parts4engines do for you if you can't be bothered to do it yourself. Plenty of of online seal dealers around. Back when I needed one, they happily swapped the spring for a stainless one on request.
Pat O Donnell in Chapelizod are the Volvo agents, they will have or very quickly get you the part.
Parts4engines will get you a generic part ( might be the same) and good service.