just taken all the paint back to the alloy on saildrive it was flaky and manky, whats the best alloy paint i assume it has to be some sort of etch primer not sure if the volvo primer is for bare alloy anyone done this
regards Tony
I'm sure there are several acceptable methods. I used Interlux Brushease 433 solvent, followed by 4 coats of Primocon which forms a rubbery barrier coat. Over that, I put an econea based anti fouling paint. I used Pettit Ultima Eco, but there are many brands of this nonmetallic paint available. Make sure you pay attention to the application directions. I am happy with the results after 3 seasons. Good luck!
Sent from my iPhone using Tapatalk