Anyone got information or diametions of these grommets.
UC-2802. 8mm
One of mine has started weep so need to do something about them. I can get grommets from lots of places but need diametions or a known suppler of the part. I am already talking to Clipper but no response yet.
Boat in France so cannot measure them. I thought it would be easy to get spares!! But!!
So, looking for tank hole size and thinkness, I can work the rest out.
Thanks
Odysseus
Bav 38 2006
Found a UK supplier
http://www.phoenixmarinesolutions.co.uk/Products/Parker-UCC-Return-Bushes/2802
Odysseus
Bav 38
These look the same as the flow and return fuel pipes. Are they simply a push fit? I presume there is a tube going to the tank bottom. Do you know the purpose of the connection in your picture?
Its a fuel visual level indicator, however I use mine to sample fuel from bottom of the tank and a supply fuel to my webasto.
The grommets are push in type and an 8mm pipe goes through it.
See my posts before.
Odysseus
Bav 38
Quote from: Odysseus on April 16 2015, 14:51
Anyone got information or diametions of these grommets.
UC-2802. 8mm
One of mine has started weep so need to do something about them. I can get grommets from lots of places but need diametions or a known suppler of the part. I am already talking to Clipper but no response yet.
Boat in France so cannot measure them. I thought it would be easy to get spares!! But!!
So, looking for tank hole size and thinkness, I can work the rest out.
Thanks
Odysseus
Bav 38 2006
8mm grommet is for
Quote from: Odysseus on April 16 2015, 18:04
Found a UK supplier
http://www.phoenixmarinesolutions.co.uk/Products/Parker-UCC-Return-Bushes/2802
Odysseus
Bav 38
Clipper Marine can supply these grommets cheaper than Phoenix. 8mm for sighting tube. 12mm for fuel our and return tubes.
I have 8 left over if people have a probelem getting them.
Odysseus
Bav 38