AC Pump Relay Box/Pannel on '17 Vision 42

Started by Nate Feldick, June 10 2019, 03:01

Previous topic - Next topic

Nate Feldick

Hello All!  My AC pump runs continuously on my 2017 Vision 42.  I know its probably an issue with the pump relay switch but after looking at all the usual places, I can't find it.  Anyone know where the Pump Relay box/panel may be located?  Thanks!

JJackson18b

Curious if you found the answer to this, mine does the same...
Jon J.  SV Ruck-Up

paulemeier1

pay attention not to get the hole water from the fresh water tank into your boat.
because it is also passible that there is a leak at a non visible area in your ship so better have a look.
Or the fresh water tank is empty? then the pump also run continuos

Philipio

I have a Bav. 33 Cruiser (2006) and the fuel gauge stopped working a couple of months ago. For some reason  or other the sender unit was a 3 wire system. On going through the circuitry i found out that the feed for the sender was actually coming via the gauge in the binnacle.Easy to see the spade connections  without dismantling everything. Replaced the sender with a new 2 wire system and everything works great now.